Comparisons

VirtualBox vs VMware Workstation and Fusion: features, Apple silicon and which to pick

VirtualBox vs VMware Workstation and Fusion in 2026: both free, open vs closed source, snapshots, nested virtualization, Apple silicon and host support.

Published ~8 min read
On this page

Short answer: both are free type 2 hypervisors for running virtual machines on your own computer. Oracle VirtualBox is open source (GPLv3) and runs on Windows, Linux, macOS (Intel and Apple silicon) and Solaris; VMware Workstation Pro (Windows and Linux) and Fusion Pro (Mac) are closed source but free for personal and commercial use since November 2024. Pick VirtualBox for one tool on every desktop and full scripting; pick VMware for a polished UI and VMware ecosystem features.

snapshots and nested virtualisation from the command line
# VirtualBox
VBoxManage --version
VBoxManage snapshot "lab-vm" take "before-upgrade" --live     # VM keeps running
VBoxManage modifyvm "lab-vm" --nested-hw-virt=on              # VM must be powered off

# VMware Workstation Pro
vmrun snapshot "/vms/lab-vm/lab-vm.vmx" before-upgrade
vmrun listSnapshots "/vms/lab-vm/lab-vm.vmx" showtree
vmrun revertToSnapshot "/vms/lab-vm/lab-vm.vmx" before-upgrade

Versions and terms below are as of November 2026, from virtualbox.org and from Broadcom’s release notes, knowledge base and blog, read on 13 November 2026. Licensing, the Extension Pack and running either one next to Hyper-V are covered in detail in Hyper-V vs VMware vs VirtualBox; this page goes deeper on features, Apple silicon and day-to-day use.

VirtualBox vs VMware at a glance

Oracle VirtualBoxVMware Workstation Pro / Fusion Pro
Newest release7.2.22, 20 October 2026Workstation Pro 26H1u1 (3 September 2026); Fusion Pro 26H1u1
CostFree; Extension Pack free only for personal and educational useFree for commercial, educational and personal use since 11 November 2024
SourceOpen source, GPLv3 (base package)Proprietary
Host systemsWindows (x86 and Arm), Linux, macOS Intel and Apple silicon, SolarisWorkstation: Windows and Linux. Fusion: Macs that support macOS 15 Sequoia or later
Apple siliconArm guests only (Linux, BSD, Windows 11 on Arm)Fusion Pro; Windows 11 on Arm via the built-in download
SnapshotsYes, including live snapshots of a running VMYes, with a snapshot manager tree
ClonesFull and linkedFull and linked
Nested virtualisationNested VT-x/AMD-V setting (x86 VMs only)Virtualize Intel VT-x/EPT or AMD-V/RVI setting
USBOHCI, EHCI and xHCI (USB 3.0) controllersUSB 3.2 support since 25H2
Command lineVBoxManage covers every settingvmrun for power, snapshots and guest tasks; dictTool for .vmx files
SupportCommunity forums; Extension Pack also under commercial termsCommunity forums and docs; no ticket support for new free users

What changed in 2024 and 2025

On 11 November 2024 Broadcom made Workstation Pro and Fusion Pro free for everyone, commercial use included, and stopped selling them. Its knowledge base (KB 368667) says the free version starts at Workstation Pro 17.5.2 and Fusion 13.5.2, needs no licence key, and is downloaded from the Broadcom support portal with a free account. Existing paid contracts keep support until they end; free users get forums, documentation and knowledge base articles, not support tickets.

In October 2025 VMware moved to calendar names: 25H2 means the second half of 2025. 25H2 added virtual hardware version 22, USB 3.2 and the dictTool utility for editing configuration files; 26H1, released on 14 May 2026, made Workstation Pro for Windows a 64-bit application and added Ubuntu 26.04 and Fedora 43 and 44 as hosts. VirtualBox kept numbered releases: 7.1 (September 2024) brought Apple silicon hosts, and 7.2 (August 2025) a new toolbar-based interface and Arm virtualisation on Windows on Arm hosts.

Features compared

Snapshots and clones

Both save the state of a VM and roll back to it. VirtualBox can take and delete snapshots while the VM runs (--live keeps it running during the snapshot), and clones VMs either fully, with copies of every disk, or as linked clones, which share the source disks through differencing images and take seconds to create. Workstation Pro and Fusion Pro have the same pair, plus a Snapshot Manager that shows the tree of snapshots. Linked clones of either product break if you delete the source VM, so keep full clones for anything long-lived.

Nested virtualisation

Running a hypervisor inside a VM (KVM, Hyper-V or Proxmox VE in a lab) needs the host CPU’s virtualisation extensions passed through. In VirtualBox that is Nested VT-x/AMD-V on the Processor tab, or --nested-hw-virt=on; it is not available for Arm VMs, and the 7.2.0 changelog lists a fix for it on Intel CPUs. In VMware it is Virtualize Intel VT-x/EPT or AMD-V/RVI under Processors; Broadcom’s knowledge base reports it as “not supported on this platform” when the host reserves those extensions for itself.

On Windows, the hypervisor setting matters more than the product. When Hyper-V, WSL 2 or Memory Integrity is on, Workstation runs VMs through the Windows Hypervisor Platform in its Host VBS mode, and Broadcom’s documentation lists the cost: no nested virtualisation, no performance counters, and VMs that can run slower. VirtualBox detects Hyper-V and uses it as its virtualisation engine (the Windows Hypervisor Platform feature must be enabled too), and Oracle’s manual warns of significant performance degradation. If you need nested labs on a Windows PC, check this first; installing WSL is one common way it gets switched on.

Performance

Both use the CPU’s hardware virtualisation (Intel VT-x or AMD-V), so CPU-bound work in a guest runs at close to the host’s speed on both; we did not benchmark them for this page. Differences show up in graphics and I/O. Install the guest tools (Guest Additions for VirtualBox, VMware Tools or open-vm-tools for VMware) before you judge either one: they bring the display, mouse, shared folder and clipboard drivers. 3D acceleration exists in both; VirtualBox 7.2 dropped it on Intel Macs and added an experimental 3D driver on Apple silicon.

Apple silicon and Arm hosts

This is where the two differ most in 2026. Neither emulates an x86 CPU: the VirtualBox manual says outright that x86 guests on an Arm host are not supported, and on an Apple silicon Mac both run Arm builds of operating systems.

  • VirtualBox has run on Apple silicon since 7.1.0 (9 September 2024), first for Linux and BSD guests; 7.2 added Windows 11 on Arm guests on Arm hosts and an experimental 3D driver on Apple silicon. The graphics controller there is VMSVGA only.
  • Fusion Pro is one download for Intel and Apple silicon Macs and can fetch and install Windows 11 on Arm itself, with a virtual TPM and UEFI as Windows 11 requires. 25H2 supports macOS Tahoe as a host on both kinds of Mac.

Workstation Pro, by contrast, is a Windows and Linux product. On a Windows on Arm laptop the VirtualBox 7.2 installer is the one of the two that lists Arm virtualisation.

VirtualBox or VMware: which one should you pick?

  • Same tool on Windows, Linux and Mac, or Solaris: VirtualBox. One VM format and one command line everywhere.
  • Everything scripted, or open source required: VirtualBox. VBoxManage reaches every setting; the base package is GPLv3.
  • A company that needs disk encryption, remote display or webcam passthrough without buying a licence: VMware. Those VirtualBox features sit in the Extension Pack, which is free only for personal and educational use.
  • Labs that mirror production on vSphere or ESXi: VMware. The same VMDK disks and OVF exports, and Workstation connects to remote ESXi hosts (26H1 added connections to remote Arm-based ESXi hosts, which Broadcom marks as a tech preview).
  • Windows 11 on an Apple silicon Mac: Fusion Pro is the simpler path; VirtualBox 7.2 works too.
  • Vendor support tickets: neither for free. Oracle offers the Extension Pack under commercial terms; Broadcom no longer sells Workstation or Fusion.

Moving a VM between them is mostly a disk conversion with qemu-img or an OVF export and import; the commands are in the Hyper-V vs VMware comparison.

When the VM should live on a server

A desktop hypervisor is for labs, testing and running another OS next to your own. A workload that has to stay online (a website, a game server, a CI runner) belongs on a server, where a type 1 hypervisor such as KVM does the job. A KVM VPS already is that virtual machine, so there is nothing to install; if you want to build your own lab of nested VMs on rented hardware, a dedicated server with Proxmox VE or plain KVM gives you the CPU extensions directly. The concepts behind all of this are in what is virtualization.

Frequently asked

Is VMware Workstation better than VirtualBox?

Neither wins on every count. VMware Workstation Pro has the more polished interface, works with ESXi and vSphere formats and is now free for commercial use. VirtualBox is open source, runs on more host systems including Solaris and Windows on Arm, and can be scripted completely with VBoxManage.

Is VMware Workstation Pro free now?

Yes. Since 11 November 2024 Broadcom offers Workstation Pro and Fusion Pro free for commercial, educational and personal use, from version 17.5.2 on and without a licence key. Downloads need a free Broadcom account, and new free users get community support rather than support tickets.

Does VirtualBox run on Apple silicon Macs?

Yes, since VirtualBox 7.1.0 in September 2024. It runs Arm guests only: Linux and BSD, and Windows 11 on Arm since 7.2. The VirtualBox manual states that x86 guests on an Arm host are not supported.

Do VirtualBox and VMware support nested virtualization?

Both do on x86 hosts. VirtualBox calls it Nested VT-x/AMD-V (VBoxManage modifyvm --nested-hw-virt=on) and VMware calls it Virtualize Intel VT-x/EPT or AMD-V/RVI. On Windows with Hyper-V enabled, VMware's Host VBS mode does not support nested VMs, so turn the Windows hypervisor off for nested labs.

Related articles

All comparisons